MiniDEK 16″ x 16″

Regular Price $149.00

SKU: 21001

+ Small yet mighty version of our best-selling TrueDEK Classic Shower Base
+ Designed for use in laundry rooms, pet showers, etc
+ Quick and incredibly easy to install

117 149
truedek-classic-drains
0
116323
721
722
723
132
125
126
127
128
129
123
124
truedek-waterproofing-kits
0
183
170

Description

Ideal for installation in laundry rooms, pet showers, washrooms, commercial bathrooms, outdoor showers, etc, the MiniDEK is a small yet mighty version of the TrueDEK Classic shower base, which can be installed with any of our Classic Drains for quick and efficient drainage when it’s needed.

Product Specification:

• Made from compression molded glass-fiber reinforced plastic (GRP) for superior strength
• Install on wooden joists (no need to notch, lower or alter joists), sub-floor, or concrete
• 6¼” drain hole diameter
• 4 pre-sloped gradient planes direct water flow towards drain
• 2% per foot or greater gradient (varies due to length of pitch)
• 7/8″ thick around perimeter
• 1¾” wide leveling rim around perimeter with pre-bored, countersunk pilot holes
• Finish with tile or stone (between ¼”-1″ thick) or commercial-grade weldable vinyl flooring
• For tile that is 2″ x 2″ or smaller, conform to the pitched contours of the base; for tile larger than 2″ x 2″, make valley cuts so the tile lays properly on all pre-pitched surfaces
• Covered by AKW limited lifetime warranty
• You will need an ARC Waterproofing Kit and Classic Drain assembly
• For more details, see Specification Sheet
• Review installation instructions before beginning your project

Specification Sheets

Download Specification Sheet

What you will need

  • TrueDEK Classic foundation
  • TrueDEK Classic Drain
  • Waterproofing Kit (extra waterproofing supplies may be required depending on the size and complexity of a project)
  • Circular saw
  • Flush-cutting saw or reciprocating saw
  • Power drill
  • Belt sander or orbital sander
  • Hammer Pry bar
  • Level Caulking gun
  • Speed square
  • Measuring tape
  • Scissors or utility knife
  • 3″ or 4″ paint brush (throw-away type)
  • Paint roller and cover
  • Polyurethane construction adhesive (five 10 oz. tubes)—make sure adhesive bonds to plastic and wood
  • Acrylic paintable caulk (one 10 oz. tube)
  • #9 x 2″ ceramic-coated or stainless steel screws
  • 2× lumber for blocking

There are no video tutorials for this product.

There are no FAQs for this product.

Find your nearest ARC distributor

Find ARC bathroom products at 170+ distributors located across the United States & Canada, including a range of national chains and independent merchants.

Learn more

©2024 ARC Inc. All Rights Reserved | Website by Super Digital