Tuff Form Linear Tub Replacement Shower Base 59″ x 35 1/2″

Regular Price $853.00

SKU: 21210

+ Sized to directly replace a bath tub and offer barrier-free access to the shower
+ Structural compression mold GRP offers superior strength, up to 840lbs max.
+ Pre-sloped with 4 gradient planes for quick, efficient drainage
+ Stylish and highly flexible linear stainless-steel drain cover for a contemporary finish
+ Create a zero-entry shower without modifying joists

117680 853
tuff-form-linear-tub-replacement-base-drains
0
117680
117681
117682
117683
waterproofing-kits
0
183
170

246 in stock

Description

Designed to directly replace a bath tub when no longer practical, the Tuff Form Linear Tub Replacement base is precisely pre-sloped for accurate, fast drainage and benefits from a linear drain gulley which offers up to 3 drain connection points for showers that require higher flow volumes.

The base is made from lightweight yet incredibly strong compression molded glass-fiber reinforced plastic (GRP), ensuring superior support for wheelchair users and/or those needing assistance with showering, and is the perfect foundation for ceramic tile or natural stone.

Showers built on Tuff Form bases offer the timeless advantages of zero-entry access which is designed to be wheelchair and disability friendly, as well as easier to clean and safer to use for the whole family, for years to come.

Product Specification:

  • Made from compression molded glass-fiber reinforced plastic (GRP) for superior strength
  • 840lbs max. capacity when installed on 16″ o.c. joist systems, enough to support a wheelchair user and carer
  • Waffle underside ensures rigidity while being lightweight (approx. 46lbs)
  • Install on wooden joists (no need to notch, lower or alter joists), sub-floor, or concrete
  • Can be cut down to size using standard power tools (within 6″ of drain)
  • Extend length of pitch to comply with ADA regulations using Pitch Extension Panels
  • 4 pre-sloped gradient planes direct water flow towards drain
  • 2% per foot or greater gradient
  • Integrated drain gulley with up to 3 locations for you to connect to the drain line
  • 7/8″ thick around perimeter
  • 1¾” wide leveling rim around perimeter with pre-bored, countersunk pilot holes
  • Finish with tile or stone (between ¼”-1″ thick)
  • For tile that is 2″ x 2″ or smaller, conform to the pitched contours of the base; for tile larger than 2″ x 2″, make valley cuts so the tile lays properly on all pre-pitched surfaces
  • Covered by AKW limited lifetime warranty
  • You will need an AKW Waterproofing Kit and Tuff Form Linear Tub Replacement Drain Cover
  • For more details, see Specification Sheet
  • Review installation instructions before beginning your project

Specification Sheets

Download Specification Sheet

What you will need

There are no video tutorials for this product.

+ -
I lost the screws for my drain for tile. What sizes do I need?

All the screws that come with the drain for tile are stainless steel, and they are metric sizes and thread counts. These are available at many well-stocked hardware stores in their specialty fastener section (often you'll find an aisle with pull-out drawers, and inside the drawers are all kinds of unique fasteners). Here is the screw information:

1. For the four screws that fasten the adaptor to the foundation, you really can use flat head screws that fit, and they don't have to be metric. We recommend #6 or #8 x 3/4" long, flathead, wood threaded style screws in stainless steel or ceramic coated. Always drill pilot holes before driving these screws.

2. To secure the clamping ring, you'll need M4 x 0.7 x 16mm long stainless steel screws. These have to be metric and the proper size and threading to fit the threaded holes in the adaptor.

Find your nearest AKW Dealer

Find AKW bathroom products at 170+ dealers located across the United States & Canada, including a range of national chains and independent merchants.

Learn more

©2025 ARC Inc. All Rights Reserved | Website by Super Digital